Skip to content

The only plate profile named on this shelf

NEEWER GM36 low-profile ball head, 15 kg, Arca 38 mm

Fifteen kilograms declared and the only Arca-compatible plate named on this shelf, on a low-profile ball head weighing 310 g at 43 €.

NEEWER GM36 low-profile ball head with its Arca plate and panning scale

NEEWER GM36 low-profile ball head, 15 kg, Arca 38 mm

Fifteen kilograms declared and the only Arca-compatible plate named on this shelf, on a low-profile ball head weighing 310 g at 43 €.

Head type
A low-profile ball head with a 36 mm ball, in the title and the first bullet, which gives the reason for the shape: a lower centre of gravity makes the head more stable. The third bullet adds 360 degrees of pan and 90 of tilt in a U-shaped notch — the cutout that lets a camera drop into portrait orientation
Declared load
33 lb, 15 kg, in the first bullet — the largest figure on this shelf and more than twice what any tripod in this catalogue declares. The hub above says the lower of the head and legs governs, so this head will never be the limiting part of any assembly built from these pages
Plate standard
Arca-compatible, 38 mm, named explicitly in the second bullet with a 1/4 inch fixing screw and rubber pads to protect the camera. It is the ONLY page of the three here to name a profile, and the hub above says to read the plate before the load figure precisely because an Arca dovetail joins what most bags already contain
Mounting thread
A 3/8 inch thread below with a 3/8 to 1/4 inch screw adapter supplied, in the first bullet, said to fit most tripods, monopods and sliders. Supplying the adapter matters: it is the small brass ring that otherwise lives at the bottom of a bag until it is lost
Panning base and markings
A separate panning foot with a 360 degree scale, in the third bullet, credited with precise and smooth panoramic work, plus a bubble level for keeping the horizon straight. A panning base independent of the ball is what lets a level pan stay level — the K&F below it describes no such base
Locking and friction controls
Three locking knobs, in the fifth bullet: release them to set the ball freely, turn the camera gently for a panorama, release the plate. No separate friction adjustment is named, so the ball either holds or moves
Published weight
310 g, in the fourth bullet, with CNC-milled aluminium alloy named as the material. Half again the weight of the K&F, for half again the declared load
Amazon reference
B0B8CKD3TN (same reference on 6 Amazon marketplaces)
EAN
0191073122574
  • A 38 mm Arca-compatible plate, the only named profile on this shelf
  • Fifteen kilograms declared, more than twice what any tripod in this catalogue carries
  • No friction control, so the ball holds or releases with nothing in between

Best for: Any tripod, monopod or slider in this catalogue, for a photographer who already owns Arca-profile plates and wants the head to stop being the limit.

≈ $36 / £38 / 43 €
Check price on Amazon

Specifications

Head type
A low-profile ball head with a 36 mm ball, in the title and the first bullet, which gives the reason for the shape: a lower centre of gravity makes the head more stable. The third bullet adds 360 degrees of pan and 90 of tilt in a U-shaped notch — the cutout that lets a camera drop into portrait orientation
Declared load
33 lb, 15 kg, in the first bullet — the largest figure on this shelf and more than twice what any tripod in this catalogue declares. The hub above says the lower of the head and legs governs, so this head will never be the limiting part of any assembly built from these pages
Plate standard
Arca-compatible, 38 mm, named explicitly in the second bullet with a 1/4 inch fixing screw and rubber pads to protect the camera. It is the ONLY page of the three here to name a profile, and the hub above says to read the plate before the load figure precisely because an Arca dovetail joins what most bags already contain
Mounting thread
A 3/8 inch thread below with a 3/8 to 1/4 inch screw adapter supplied, in the first bullet, said to fit most tripods, monopods and sliders. Supplying the adapter matters: it is the small brass ring that otherwise lives at the bottom of a bag until it is lost
Panning base and markings
A separate panning foot with a 360 degree scale, in the third bullet, credited with precise and smooth panoramic work, plus a bubble level for keeping the horizon straight. A panning base independent of the ball is what lets a level pan stay level — the K&F below it describes no such base
Locking and friction controls
Three locking knobs, in the fifth bullet: release them to set the ball freely, turn the camera gently for a panorama, release the plate. No separate friction adjustment is named, so the ball either holds or moves
Published weight
310 g, in the fourth bullet, with CNC-milled aluminium alloy named as the material. Half again the weight of the K&F, for half again the declared load
Amazon reference
B0B8CKD3TN (same reference on 6 Amazon marketplaces)
EAN
0191073122574

On the listing

Five bracketed bullets. A low-profile ball head with a lower centre of gravity carrying up to 33 lb or 15 kg, with a 3/8 inch bottom thread and a 3/8 to 1/4 inch screw adapter fitting most tripods, monopods and sliders; a 38 mm Arca-type quick-release plate with a 1/4 inch fixing screw and rubber pads, compatible with reflex, mirrorless and camcorder bodies; 360 degrees of pan and 90 of tilt in a U-shaped notch, with a panning foot carrying a 360 degree scale and a bubble level; a CNC-milled aluminium alloy body weighing 310 g; and three locking knobs for setting the ball, panning smoothly and releasing the plate.

The only profile named here

Arca-compatible, 38 mm, written in the bullet rather than implied. The hub above says to read the plate before the load figure, because the dovetail decides what else in a bag still fits. Of the three heads on this shelf, two describe a plate and one names a standard.

Fifteen kilograms, and what it really buys

More than twice what any tripod in this catalogue declares, so the head stops being the limiting part of any assembly. The practical gain is margin rather than capacity: a head working far below its rating creeps less when a heavy lens hangs off axis.

A panning base that is its own part

Three hundred and sixty degrees with a scale, under the ball rather than through it. That is what keeps a pan level once the horizon is set — turn the ball instead and the horizon tips as it goes.

The adapter is in the box

Three eighths to a quarter inch, supplied. It is a two-euro part that stops a head being unusable on the wrong tripod, and it is the piece most often missing.

Availability

About 43 € on the German, French, Italian and Spanish Amazon stores when this page was last checked.

The American and British Amazon stores carry it too, priced in local currency. Those amounts are deliberately absent from the range above, which reads euro stores only.

Everything in this section is the figure Keepa carried on the day of the last update to this page. Availability and prices shift without notice.

Prices quoted in this text were read on 13 September 2026. The live price is at the top of the page.

More tripod heads

  • K&F Concept KF-25 ball head in black with its three control knobs and bubble level

    K&F CONCEPT KF-25 ball head, 10 kg, 205 g

    Ten kilograms declared from 205 g of aluminium at 26 €, with a graduated ball, a bubble level and three knobs — and a plate whose profile the page never names.

    Head type
    A ball head, in the title and throughout. The hub above describes the type as swinging freely and locking in one action — faster than a three-way head and less precise when only one axis should move. The third bullet adds a scale on the ball itself, which is unusual at this price and lets an angle be returned to
    Declared load
    10 kg, in the first bullet, credited to a high-grade aluminium alloy. Read it against the shelf next door: the tripods in this catalogue top out at 6.35 kg, and the hub above says the lower of the two ratings governs. A 10 kg head does not make a 6 kg tripod carry more
    Plate standard
    Not named. The fourth bullet gives a removable quick-release plate with a 1/4 inch thread for all reflex cameras, and never says whether the dovetail follows the Arca profile or the maker’s own. The hub above calls the plate the part that decides what else in a bag still fits, and this page leaves that unanswerable
    Mounting thread
    Both, in the fourth bullet: a 1/4 inch thread above for the camera, and 3/8 inch screw holes below so the head mounts on a tripod, a monopod or a camera slider. Naming all three destinations is more than most heads bother with
    Panning base and markings
    A scale on the ball, in the third bullet, with three knobs controlling the ball and the panorama. The page does not describe a separate panning base under the head — so whether the horizontal movement is independent of the ball cannot be read, and on a ball head that is the difference between a level pan and a drifting one
    Locking and friction controls
    Three knobs, in the third bullet, for the ball and the panning movement. The second bullet claims strong locking force and names the bubble level as what brings the camera to level. No separate friction control is described — so the knob either holds or releases
    Published weight
    205 g, in the fifth bullet, with a height of 80 mm. At 205 g it is a sixth of the Manfrotto’s mass, and the page pairs both figures with portability
    Amazon reference
    B08VW91D74 (same reference on 6 Amazon marketplaces)
    EAN
    6942052556729
    • Two hundred and five grams and 80 mm tall, with both figures published
    • A scale on the ball and a bubble level, so an angle can be levelled and returned to
    • The plate profile is never named, so what else it fits is unknown

    Best for: A light tripod or monopod that needs a head which locks in one action and weighs almost nothing.

    ≈ $25 / £21 / 26 €
    Check price on Amazon
  • Manfrotto 410 Junior geared head with its three adjustment knobs and levelling bubble

    Manfrotto 410 Junior geared head, 5 kg, 1.22 kg

    A geared head at 229 € — the only one here adjusted by turning knobs rather than releasing a ball — carrying 5 kg and weighing 1.22 kg, six times the 205 g K&F beside it.

    Head type
    A geared head, and it is the only one in this catalogue. The first bullet claims extreme precision control in three directions from the gearing and the bubble level. The hub above describes a three-way head as separating the axes so one can be adjusted without disturbing the others; a geared head goes further — each axis is driven by a worm gear, so it moves by fractions of a degree and cannot slump when released
    Declared load
    5 kg, in the fifth bullet, alongside the weight of 1.22 kg. It is the smallest rating of the three heads here — a third of the NEEWER’s 15 kg — and it is the one figure that sits within reach of the tripods next door, which top out at 6.35 kg
    Plate standard
    The Manfrotto 410 plate, named in the third bullet as supplied. It is a proprietary profile, which the hub above warns commits every future clamp to the same maker. That is the cost of this head: the plates are not the dovetail most third-party gear is cut for
    Mounting thread
    Not published. Five bullets describe the gearing, the locking, the plate, the format range and the weight, and no thread size appears — so whether it takes 3/8 inch alone or both is unknown before it arrives
    Panning base and markings
    Not described as a separate base. The first bullet claims precision in three directions and the gearing implies markings on each axis, but no scale and no independent panning foot is named. On a head sold for precision that is a surprising silence
    Locking and friction controls
    A locking system named in the second bullet as allowing fast and secure movement between shots. On a geared head the gear itself is the friction — nothing is released and re-caught, which is precisely why architectural and product photographers buy them
    Published weight
    1.22 kg, in the fifth bullet. It is six times the K&F on this shelf and nearly four times the NEEWER, and it is the honest price of gearing: three worm drives and their housings weigh what they weigh
    Amazon reference
    B000JLI4Q2 (same reference on 6 Amazon marketplaces)
    EAN
    0719821156376
    • Geared adjustment on three axes, the only head in this catalogue that moves by fractions of a degree
    • Nothing slumps when a control is released, which is what makes a framing repeatable
    • A proprietary plate profile, which ties every future clamp to one maker

    Best for: Architecture, product and copy work on a solid tripod, where a framing has to be adjusted by millimetres and held exactly.

    ≈ $219 / £229 / 229 €
    Check price on Amazon

Elsewhere in the camera bag

  • PROfezzion 67 mm UV filter in its slim aluminium frame beside its padded case

    PROfezzion 67 mm, 99.5 per cent transmission, 0.7 mm glass

    The only filter on this shelf that publishes what it passes — 99.5 per cent on twelve layers, through 0.7 mm of glass in a 3 mm frame, for 13 €.

    Thread size
    67 mm, in the title, which also names Canon R6 Mark III, II, 90D, 80D and 70D bodies. Naming bodies on a filter is loose — a filter fits a thread, not a camera — but it tells a buyer the size is the common one for those kits
    Glass
    Japanese optical glass, finely ground and polished, in the third bullet, with a hardness given as up to 9HD. The hardness notation is unusual and unexplained on the page; what it is reaching for is scratch resistance on the surface that gets wiped most
    Coating description
    TWELVE layers, multi-coated, in the second bullet, to prevent internal ghosting and reflections. Fewer than the eighteen claimed by the 11 € K&F here — and unlike that page, this one publishes the result the layers produce
    Frame thickness
    BOTH figures published, and this is the page that measures itself: the GLASS is 0.7 mm thick and the FRAME only 3 mm, in the fourth bullet, stated as minimising the likelihood of vignetting. Three millimetres is the thinnest frame on this shelf, against 3.4 mm on the Hama and nothing at all from the two others
    Material
    An aviation-grade aluminium alloy frame, in the third bullet — the only frame alloy named on this shelf
    Front thread provision
    Not mentioned, which on a 3 mm frame is worth noting: the thinner the ring, the less room for a front thread, and the page does not say whether a cap or hood still screws on
    Stated transmission figure
    PUBLISHED — an average light transmission of AT LEAST 99.5 PER CENT, in the second bullet, and the only such figure on this shelf. It is the number that makes the coating count meaningful: twelve layers passing 99.5 per cent is a measurable claim, where eighteen layers and no percentage is an assertion
    Amazon reference
    B09366T36S (same reference on 6 Amazon marketplaces)
    EAN
    6940202350425
    • Ninety-nine point five per cent transmission published — alone on this shelf
    • Both thicknesses published: 0.7 mm of glass in a 3 mm frame, the thinnest here
    • No front thread provision mentioned, on the thinnest frame here

    Best for: A 67 mm lens used at its widest, where a 3 mm frame and a measured transmission are worth 4 € over the cheapest lid on this shelf.

    ≈ $13 / £11 / 12 €
    Check price on Amazon
  • ayex battery grip on a Canon EOS 6D Mark II showing its portrait controls

    ayex For EOS 6D Mark II, two LP-E6, four controls

    Fifty-eight euros for the fullest vertical grip here: two LP-E6 cells and four duplicated controls on the EOS 6D Mark II, after the BG-E21.

    Bodies named
    ONE: the Canon EOS 6D Mark II, in the title and the first bullet, with the fourth naming the Canon BG-E21 as the design it follows. A single body is the narrowest compatibility on this shelf and the most certain — a grip is cut to one chassis
    Cells carried and reporting
    TWO LP-E6, published in the second bullet, which says the grip allows two cells to be used so there is no constant recharging or swapping — and the first bullet puts it as doubling the camera’s capability. Whether the body reports each cell separately is not described
    Duplicated controls
    THE FULLEST SET ON THIS SHELF, in the fifth bullet: a shutter release with TWO PRESSURE POINTS — half press for focus, full press to fire — an AF-ON button, an AE/FE lock and further functions, all placed for portrait-format use. Four controls against the one of the 38 € CELLONIC here
    Sealing claims
    None
    Tripod thread position
    The third bullet says the grip is FIXED TO THE CAMERA’S TRIPOD THREAD — which states how it mounts and, like every page on this shelf, never confirms that a replacement thread exists underneath
    Published weight
    None
    Amazon reference
    B0799NLHWZ (same reference on 6 Amazon marketplaces)
    EAN
    4250559526827
    • Four duplicated controls, including AF-ON and AE/FE lock
    • Two LP-E6 cells, doubling the run time
    • One body only — nothing else takes it

    Best for: An EOS 6D Mark II used for portraits or weddings, where the vertical hold has to offer the same controls as the horizontal one.

    ≈ £62 / 51 €
    Check price on Amazon
  • CELLONIC vertical battery grip fitted beneath a Nikon reflex body

    CELLONIC Vertical grip for Nikon D40 to D5000, portrait release

    Thirty-eight euros for a true vertical grip for five Nikon bodies, with a portrait shutter release and a spare cell — and no mention of dials, threads or weight.

    Bodies named
    FIVE, in the first bullet: the Nikon D5000, D3000, D60, D40 and D40x, for EN-EL9 and EN-EL9E cells — and the part-number field names the Nikon MB-D60, the original grip this copies. Naming the original is the clearest compatibility statement available
    Cells carried and reporting
    A SPARE BATTERY is included, in the fifth bullet, for longer sessions and continuous use. How many cells the grip holds, and whether the camera reads them individually, is not stated — which on a grip is the specification a photographer checks first
    Duplicated controls
    A SHUTTER RELEASE FOR PORTRAIT-FORMAT SHOOTING, in the third bullet — and that is what makes this a grip rather than a battery holder. What it does NOT claim is what the 58 € ayex here does: command dials, an AF-ON button, an exposure lock. One duplicated control, named
    Sealing claims
    None
    Tripod thread position
    NOT DESCRIBED. A vertical grip bolts into the camera’s own tripod socket and must provide a replacement underneath, or the camera cannot go on a tripod at all. The page never mentions it, on a product whose whole installation depends on that thread
    Published weight
    None
    Amazon reference
    B0BM9RT2D6 (same reference on 5 Amazon marketplaces)
    EAN
    4063714126004
    • A genuine portrait-format shutter release, and the MB-D60 named as its pattern
    • Five Nikon bodies listed individually, with both EN-EL9 cell types
    • No tripod thread described, on a grip that occupies the camera’s own

    Best for: A Nikon D40 through D5000 shot in portrait format for hours — weddings, portraits — where the wrist should stay straight.

    ≈ £42 / 38 €
    Check price on Amazon

All tripod heads