Skip to content

Two hundred and five grams, ten kilograms

K&F CONCEPT KF-25 ball head, 10 kg, 205 g

Ten kilograms declared from 205 g of aluminium at 26 €, with a graduated ball, a bubble level and three knobs — and a plate whose profile the page never names.

K&F Concept KF-25 ball head in black with its three control knobs and bubble level

K&F CONCEPT KF-25 ball head, 10 kg, 205 g

Ten kilograms declared from 205 g of aluminium at 26 €, with a graduated ball, a bubble level and three knobs — and a plate whose profile the page never names.

Head type
A ball head, in the title and throughout. The hub above describes the type as swinging freely and locking in one action — faster than a three-way head and less precise when only one axis should move. The third bullet adds a scale on the ball itself, which is unusual at this price and lets an angle be returned to
Declared load
10 kg, in the first bullet, credited to a high-grade aluminium alloy. Read it against the shelf next door: the tripods in this catalogue top out at 6.35 kg, and the hub above says the lower of the two ratings governs. A 10 kg head does not make a 6 kg tripod carry more
Plate standard
Not named. The fourth bullet gives a removable quick-release plate with a 1/4 inch thread for all reflex cameras, and never says whether the dovetail follows the Arca profile or the maker’s own. The hub above calls the plate the part that decides what else in a bag still fits, and this page leaves that unanswerable
Mounting thread
Both, in the fourth bullet: a 1/4 inch thread above for the camera, and 3/8 inch screw holes below so the head mounts on a tripod, a monopod or a camera slider. Naming all three destinations is more than most heads bother with
Panning base and markings
A scale on the ball, in the third bullet, with three knobs controlling the ball and the panorama. The page does not describe a separate panning base under the head — so whether the horizontal movement is independent of the ball cannot be read, and on a ball head that is the difference between a level pan and a drifting one
Locking and friction controls
Three knobs, in the third bullet, for the ball and the panning movement. The second bullet claims strong locking force and names the bubble level as what brings the camera to level. No separate friction control is described — so the knob either holds or releases
Published weight
205 g, in the fifth bullet, with a height of 80 mm. At 205 g it is a sixth of the Manfrotto’s mass, and the page pairs both figures with portability
Amazon reference
B08VW91D74 (same reference on 6 Amazon marketplaces)
EAN
6942052556729
  • Two hundred and five grams and 80 mm tall, with both figures published
  • A scale on the ball and a bubble level, so an angle can be levelled and returned to
  • The plate profile is never named, so what else it fits is unknown

Best for: A light tripod or monopod that needs a head which locks in one action and weighs almost nothing.

≈ $25 / £21 / 26 €
Check price on Amazon

Specifications

Head type
A ball head, in the title and throughout. The hub above describes the type as swinging freely and locking in one action — faster than a three-way head and less precise when only one axis should move. The third bullet adds a scale on the ball itself, which is unusual at this price and lets an angle be returned to
Declared load
10 kg, in the first bullet, credited to a high-grade aluminium alloy. Read it against the shelf next door: the tripods in this catalogue top out at 6.35 kg, and the hub above says the lower of the two ratings governs. A 10 kg head does not make a 6 kg tripod carry more
Plate standard
Not named. The fourth bullet gives a removable quick-release plate with a 1/4 inch thread for all reflex cameras, and never says whether the dovetail follows the Arca profile or the maker’s own. The hub above calls the plate the part that decides what else in a bag still fits, and this page leaves that unanswerable
Mounting thread
Both, in the fourth bullet: a 1/4 inch thread above for the camera, and 3/8 inch screw holes below so the head mounts on a tripod, a monopod or a camera slider. Naming all three destinations is more than most heads bother with
Panning base and markings
A scale on the ball, in the third bullet, with three knobs controlling the ball and the panorama. The page does not describe a separate panning base under the head — so whether the horizontal movement is independent of the ball cannot be read, and on a ball head that is the difference between a level pan and a drifting one
Locking and friction controls
Three knobs, in the third bullet, for the ball and the panning movement. The second bullet claims strong locking force and names the bubble level as what brings the camera to level. No separate friction control is described — so the knob either holds or releases
Published weight
205 g, in the fifth bullet, with a height of 80 mm. At 205 g it is a sixth of the Manfrotto’s mass, and the page pairs both figures with portability
Amazon reference
B08VW91D74 (same reference on 6 Amazon marketplaces)
EAN
6942052556729

On the listing

Five bracketed bullets. A high-grade aluminium alloy construction with a maximum load of 10 kg; strong locking force with a bubble level to bring the camera level; 360 degree rotation with three knobs controlling the ball and the panorama, and a scale on the ball for finding the best angle; a 1/4 inch thread with a removable quick-release plate for all reflex cameras, and 3/8 inch screw holes below for mounting on a tripod, monopod or camera slider; and a compact build 80 mm tall weighing 205 g.

Two hundred and five grams

Eighty millimetres tall, and both figures published. On a travel tripod the head is the mass that sits highest, where it does the most harm to stability, and this one weighs less than a lens cap collection. The Manfrotto three places up weighs six times as much.

A graduated ball

Rare at this price and genuinely useful: an angle set once can be found again. Ball heads are otherwise adjusted by eye, which makes a repeated framing a matter of memory.

Ten kilograms, and the tripod underneath

The hub above says the lower of the two ratings governs, and the tripods in this catalogue top out at 6.35 kg. This head is not the limiting part — which is the useful reading of a figure that would otherwise look like a boast.

The plate nobody names

Removable, 1/4 inch, and no profile. Whether it slides into an Arca clamp — the dovetail most third-party gear is cut for — is the question that decides what else in a bag still works, and this page does not answer it.

Availability

Between 26 € and 30 € on the German, French, Italian and Spanish Amazon stores when this page was last checked.

The American and British Amazon stores carry it too, priced in local currency. Those amounts are deliberately absent from the range above, which reads euro stores only.

Everything in this section is the figure Keepa carried on the day of the last update to this page. Availability and prices shift without notice.

Prices quoted in this text were read on 13 September 2026. The live price is at the top of the page.

More tripod heads

  • Manfrotto 410 Junior geared head with its three adjustment knobs and levelling bubble

    Manfrotto 410 Junior geared head, 5 kg, 1.22 kg

    A geared head at 229 € — the only one here adjusted by turning knobs rather than releasing a ball — carrying 5 kg and weighing 1.22 kg, six times the 205 g K&F beside it.

    Head type
    A geared head, and it is the only one in this catalogue. The first bullet claims extreme precision control in three directions from the gearing and the bubble level. The hub above describes a three-way head as separating the axes so one can be adjusted without disturbing the others; a geared head goes further — each axis is driven by a worm gear, so it moves by fractions of a degree and cannot slump when released
    Declared load
    5 kg, in the fifth bullet, alongside the weight of 1.22 kg. It is the smallest rating of the three heads here — a third of the NEEWER’s 15 kg — and it is the one figure that sits within reach of the tripods next door, which top out at 6.35 kg
    Plate standard
    The Manfrotto 410 plate, named in the third bullet as supplied. It is a proprietary profile, which the hub above warns commits every future clamp to the same maker. That is the cost of this head: the plates are not the dovetail most third-party gear is cut for
    Mounting thread
    Not published. Five bullets describe the gearing, the locking, the plate, the format range and the weight, and no thread size appears — so whether it takes 3/8 inch alone or both is unknown before it arrives
    Panning base and markings
    Not described as a separate base. The first bullet claims precision in three directions and the gearing implies markings on each axis, but no scale and no independent panning foot is named. On a head sold for precision that is a surprising silence
    Locking and friction controls
    A locking system named in the second bullet as allowing fast and secure movement between shots. On a geared head the gear itself is the friction — nothing is released and re-caught, which is precisely why architectural and product photographers buy them
    Published weight
    1.22 kg, in the fifth bullet. It is six times the K&F on this shelf and nearly four times the NEEWER, and it is the honest price of gearing: three worm drives and their housings weigh what they weigh
    Amazon reference
    B000JLI4Q2 (same reference on 6 Amazon marketplaces)
    EAN
    0719821156376
    • Geared adjustment on three axes, the only head in this catalogue that moves by fractions of a degree
    • Nothing slumps when a control is released, which is what makes a framing repeatable
    • A proprietary plate profile, which ties every future clamp to one maker

    Best for: Architecture, product and copy work on a solid tripod, where a framing has to be adjusted by millimetres and held exactly.

    ≈ $219 / £229 / 229 €
    Check price on Amazon
  • NEEWER GM36 low-profile ball head with its Arca plate and panning scale

    NEEWER GM36 low-profile ball head, 15 kg, Arca 38 mm

    Fifteen kilograms declared and the only Arca-compatible plate named on this shelf, on a low-profile ball head weighing 310 g at 43 €.

    Head type
    A low-profile ball head with a 36 mm ball, in the title and the first bullet, which gives the reason for the shape: a lower centre of gravity makes the head more stable. The third bullet adds 360 degrees of pan and 90 of tilt in a U-shaped notch — the cutout that lets a camera drop into portrait orientation
    Declared load
    33 lb, 15 kg, in the first bullet — the largest figure on this shelf and more than twice what any tripod in this catalogue declares. The hub above says the lower of the head and legs governs, so this head will never be the limiting part of any assembly built from these pages
    Plate standard
    Arca-compatible, 38 mm, named explicitly in the second bullet with a 1/4 inch fixing screw and rubber pads to protect the camera. It is the ONLY page of the three here to name a profile, and the hub above says to read the plate before the load figure precisely because an Arca dovetail joins what most bags already contain
    Mounting thread
    A 3/8 inch thread below with a 3/8 to 1/4 inch screw adapter supplied, in the first bullet, said to fit most tripods, monopods and sliders. Supplying the adapter matters: it is the small brass ring that otherwise lives at the bottom of a bag until it is lost
    Panning base and markings
    A separate panning foot with a 360 degree scale, in the third bullet, credited with precise and smooth panoramic work, plus a bubble level for keeping the horizon straight. A panning base independent of the ball is what lets a level pan stay level — the K&F below it describes no such base
    Locking and friction controls
    Three locking knobs, in the fifth bullet: release them to set the ball freely, turn the camera gently for a panorama, release the plate. No separate friction adjustment is named, so the ball either holds or moves
    Published weight
    310 g, in the fourth bullet, with CNC-milled aluminium alloy named as the material. Half again the weight of the K&F, for half again the declared load
    Amazon reference
    B0B8CKD3TN (same reference on 6 Amazon marketplaces)
    EAN
    0191073122574
    • A 38 mm Arca-compatible plate, the only named profile on this shelf
    • Fifteen kilograms declared, more than twice what any tripod in this catalogue carries
    • No friction control, so the ball holds or releases with nothing in between

    Best for: Any tripod, monopod or slider in this catalogue, for a photographer who already owns Arca-profile plates and wants the head to stop being the limit.

    ≈ $36 / £38 / 43 €
    Check price on Amazon

Elsewhere in the camera bag

  • Hama 49 mm UV filter in its black metal frame beside its plastic box

    Hama 49 mm, one coating layer per side, 3.4 mm frame

    Eight euros for a 49 mm colour-neutral UV filter with one coating per side, a 3.4 mm metal frame and a box — and a front thread that still takes a hood or a cap.

    Thread size
    49 mm, in the title — the smallest on this shelf, where the three others are 67 mm. Forty-nine millimetres is the thread of small primes and older kit lenses, and the buying advice above prefers the largest thread in the bag with step rings below it. This is the filter bought for one small lens
    Glass
    Optical glass in a black metal frame, in the third bullet, described as colour-neutral. No glass origin is named, where the 11 € K&F and the 13 € PROfezzion both claim Japanese optical glass
    Coating description
    COUNTED, and precisely: one coating layer on EACH SIDE — a two-fold coating, as the title has it. That is the lowest count on this shelf, against twelve layers on the PROfezzion and eighteen on the K&F, and it is stated plainly rather than dressed up
    Frame thickness
    3.4 mm, in the fifth bullet, described as a flat mount. Only two pages on this shelf publish a frame figure; the PROfezzion is 3 mm and the two others publish none. Thickness is what decides whether a wide lens sees the ring
    Material
    A black metal frame around a glass lens, in the third bullet. Black inside the frame is what stops light bouncing between filter and lens, and the colour is worth the mention
    Front thread provision
    YES, and it is the only page here that spells out what the front thread is for: the fourth bullet says further filters, a lens hood or a lens cap screw straight on. A filter without a front thread ends the stack; this one does not
    Stated transmission figure
    NOT PUBLISHED. The 13 € PROfezzion is the only filter on this shelf to give one, at 99.5 per cent minimum. With one coating layer per side, the loss here will be larger, and the page does not say by how much
    Amazon reference
    B00006JEAY (same reference on 6 Amazon marketplaces)
    EAN
    4007249700490
    • A published 3.4 mm frame and a counted coating — one layer per side
    • A front thread stated to take another filter, a hood or a cap
    • One coating layer per side, against twelve and eighteen elsewhere on this shelf

    Best for: A small 49 mm prime or an older kit lens that needs a lid over the front element, where a hood or a second filter still has to go on top.

    ≈ £7 / 8 €
    Check price on Amazon
  • K&F Concept 67 mm UV filter with its green-tinted coating catching the light

    K&F CONCEPT 67 mm, Japanese glass, 18 nano layers

    Eighteen layers of nano coating on Japanese glass for 11 €, with a claim to cut chromatic aberration — and a sales-rank citation where a seventh specification would go.

    Thread size
    67 mm, in the title, and the fifth bullet says it suits all lenses with a 67 mm thread, naming Canon, Nikon, Sony, Samsung and Fuji
    Glass
    JAPANESE OPTICAL GLASS, in the second bullet, credited with first-class light transmission, improved optical clarity and colour fidelity. The same claim the 13 € PROfezzion on this shelf makes; the 9 € Amazon Basics names no glass at all
    Coating description
    EIGHTEEN LAYERS of green anti-reflective nano coating, in the third bullet — the highest count on this shelf, against twelve on the PROfezzion and two on the Hama. The same bullet claims the coating blocks ultraviolet light, raises contrast and eliminates light haze at sea or in high mountains
    Frame thickness
    NOT PUBLISHED as a figure: the fourth bullet calls it an extremely thin filter and leaves it there. The 8 € Hama publishes 3.4 mm and the 13 € PROfezzion 3 mm, so the one page here claiming thinness is the one that does not measure it
    Material
    Not named for the frame. The glass is specified and the ring is not
    Front thread provision
    Not mentioned
    Stated transmission figure
    NOT PUBLISHED — which is the odd gap on a page that counts eighteen coating layers. Layers exist to raise transmission, and the 13 € PROfezzion publishes the resulting figure at 99.5 per cent minimum
    Amazon reference
    B0C1YZBPRK (same reference on 6 Amazon marketplaces)
    EAN
    6942052514675
    • Eighteen nano layers on named Japanese optical glass, for 11 €
    • A stated effect on chromatic aberration, which no other filter here claims
    • Calls itself extremely thin and publishes no thickness

    Best for: A 67 mm standard zoom used in bright coastal or mountain light, where haze and reflections matter more than the gap to the 9 € Amazon Basics.

    ≈ $11 / £11 / 11 €
    Check price on Amazon
  • PROfezzion 67 mm UV filter in its slim aluminium frame beside its padded case

    PROfezzion 67 mm, 99.5 per cent transmission, 0.7 mm glass

    The only filter on this shelf that publishes what it passes — 99.5 per cent on twelve layers, through 0.7 mm of glass in a 3 mm frame, for 13 €.

    Thread size
    67 mm, in the title, which also names Canon R6 Mark III, II, 90D, 80D and 70D bodies. Naming bodies on a filter is loose — a filter fits a thread, not a camera — but it tells a buyer the size is the common one for those kits
    Glass
    Japanese optical glass, finely ground and polished, in the third bullet, with a hardness given as up to 9HD. The hardness notation is unusual and unexplained on the page; what it is reaching for is scratch resistance on the surface that gets wiped most
    Coating description
    TWELVE layers, multi-coated, in the second bullet, to prevent internal ghosting and reflections. Fewer than the eighteen claimed by the 11 € K&F here — and unlike that page, this one publishes the result the layers produce
    Frame thickness
    BOTH figures published, and this is the page that measures itself: the GLASS is 0.7 mm thick and the FRAME only 3 mm, in the fourth bullet, stated as minimising the likelihood of vignetting. Three millimetres is the thinnest frame on this shelf, against 3.4 mm on the Hama and nothing at all from the two others
    Material
    An aviation-grade aluminium alloy frame, in the third bullet — the only frame alloy named on this shelf
    Front thread provision
    Not mentioned, which on a 3 mm frame is worth noting: the thinner the ring, the less room for a front thread, and the page does not say whether a cap or hood still screws on
    Stated transmission figure
    PUBLISHED — an average light transmission of AT LEAST 99.5 PER CENT, in the second bullet, and the only such figure on this shelf. It is the number that makes the coating count meaningful: twelve layers passing 99.5 per cent is a measurable claim, where eighteen layers and no percentage is an assertion
    Amazon reference
    B09366T36S (same reference on 6 Amazon marketplaces)
    EAN
    6940202350425
    • Ninety-nine point five per cent transmission published — alone on this shelf
    • Both thicknesses published: 0.7 mm of glass in a 3 mm frame, the thinnest here
    • No front thread provision mentioned, on the thinnest frame here

    Best for: A 67 mm lens used at its widest, where a 3 mm frame and a measured transmission are worth 4 € over the cheapest lid on this shelf.

    ≈ $13 / £11 / 12 €
    Check price on Amazon

All tripod heads