Cut for one field of view, which is why a generic one vignettes

The best lens hoods for 2026

A hood keeps light that is not part of the picture from striking the front element, which is where contrast goes to die on a bright day, and it protects the glass better than most filters do. Its shape follows the field of view it was cut for: a petal hood has notches at the corners because a rectangular frame sees further diagonally than it does at the sides, and a round hood suits a longer lens whose field is narrow enough not to need them. That is also why a hood is specified against named lenses rather than a thread size alone — one cut for a wider lens does nothing, and one cut for a narrower lens darkens the corners of every frame. Fitting is either a bayonet on the lens barrel, which is positive and quick, or a screw thread that shares the filter ring, which is slower and occupies the thread. Two practical points decide whether a hood stays on the camera: whether it can be reversed over the barrel for storage, and whether a filter can still be rotated with it fitted, since a polariser that cannot be turned inside its own hood will be removed and lost. Material is rubber for collapsible types, plastic or metal otherwise. We compare shape, lenses named, fitting method, filter access, reversibility and material.

The accessories that earn their place in the bag

1. 

   YRTIYO 58 mm, screw mount, plastic

   Five euros for a 58 mm screw-on hood for the Canon 18-55 mm kit lens — four bullets, one of which is the word "plastic".

   Shape

   NOT STATED. Neither petal, tulip, flower nor cylindrical appears in four bullets — and shape is the first thing this shelf compares, because it decides whether a hood works on a zoom. A cylindrical hood sized for 55 mm vignettes at 18; a petal hood is cut away at the corners precisely so it does not

   Lenses named

   One lens and nine bodies: the Canon EF-S 18-55 mm, with EOS 4000D, 3000D, 2000D, 90D, 80D, 77D, 250D, 1500D and 1300D. Naming the lens is what matters — a hood belongs to a focal length, not to a camera — and the fourth bullet widens it to all 58 mm lenses, which is a different and looser claim

   Fitting method

   SCREW MOUNTING, in the second bullet, described as easy to install and remove. A screw hood threads into the filter ring, which means it occupies the thread a filter would use — and turns to a random orientation, which matters on any hood that is not cylindrical

   Filter access

   NOT ADDRESSED. With the hood in the filter thread, whether a filter can sit underneath or in front is the question this page leaves unanswered

   Reversibility

   NOT MENTIONED. A hood that reverses over the barrel travels in the bag; one that does not is carried separately or left at home

   Material

   PLASTIC — three words in the third bullet, and that is the whole entry. Plastic is normal at 5 €; the 18 € Canon on this shelf publishes nothing more specific

   Amazon reference

   B091MSQ962 (same reference on 6 Amazon marketplaces)

   EAN

   0685330065846

   • Five euros, the cheapest on this shelf, for the commonest kit lens there is
   • A screw mount, which cannot be knocked off like a bayonet
   • The shape is never stated, which is what this shelf is compared on

   Best for: A Canon 18-55 mm kit lens that needs something over the front element for 5 €, used mostly at the long end.

   ≈ 5 €

   Check price on Amazon
2. 

   K&F CONCEPT 58 mm petal, screw mount, matt interior

   A petal hood with a matt interior for 8 € — and a page that tells you it vignettes below 25 mm and will not take a filter underneath.

   Shape

   PETAL, in the title — the scalloped shape whose corners are cut away so a wide frame does not see them. It is the shape the hub above compares first, and it is the only page on this shelf to name it apart from the 11 € CAMKIX, which supplies one alongside two rubber hoods

   Lenses named

   NONE individually. The sixth bullet claims every 58 mm Canon, Nikon, Sony, Pentax, Olympus and Fuji lens — a thread rather than a lens, which is honest for a universal hood and less useful than the named Olympus of the 11 € JJC here. A petal hood on an unspecified lens is a compromise: the scallops are cut for one angle of view, not for all of them

   Fitting method

   SCREW MOUNTING, in the second bullet, described as more secure than the alternative. On a petal hood a screw mount is a real drawback: the scallops must align with the corners of the frame, and a thread stops wherever friction stops it

   Filter access

   REFUSED, and the page says so itself: the fourth bullet states it cannot be mounted together with a filter. That is the clearest statement on this shelf and a genuine limitation — a UV or polarising filter and this hood cannot both be on the lens

   Reversibility

   Not mentioned

   Material

   Not named. What IS named is the surface that matters: a MATT INTERIOR, in the fifth bullet, credited with preventing or limiting stray light from direct light on the front of the lens. A shiny hood interior reflects light into the lens and undoes the hood’s purpose

   Amazon reference

   B0D25DXNG2 (same reference on 6 Amazon marketplaces)

   EAN

   6942052528818

   • A petal shape, and a matt interior named as the reason it works
   • Two limits stated by the maker: 25 mm vignetting, and no filter underneath
   • A screw mount on a petal hood, which cannot be aligned reliably

   Best for: A 58 mm lens at 25 mm or longer, used without a filter, where a matt-lined petal hood for 8 € is the point.

   ≈ $9 / £9 / 8 €

   Check price on Amazon
3. 

   JJC LHJ61DBK, for M.Zuiko 40-150 mm, LH-61D replacement

   A dedicated hood for three named Olympus zooms in impact-resistant ABS, replacing the LH-61D for 11 €.

   Shape

   NOT STATED — which on a dedicated hood matters less than anywhere else on this shelf. A hood cut for one specific lens is shaped to that lens’s angle of view by design, whatever the page calls it: the maker has already done the geometry that a universal hood leaves to the buyer

   Lenses named

   THE MOST PRECISE ON THIS SHELF: three full designations — M.Zuiko Digital ED 40-150 mm F4.0-5.6, M.Zuiko Digital ED 40-150 mm F4-5.6 R, and Zuiko Digital ED 40-150 mm F4.0-5.6 — plus the part it replaces, the Olympus LH-61D. Naming the original hood is the detail that settles compatibility beyond argument

   Fitting method

   Not stated. A hood sold as a replacement for a specific Olympus part fits the way that part did — a bayonet — but the page does not say so, and it is the one specification a dedicated hood should not have to leave out

   Filter access

   Not addressed. A bayonet hood mounts outside the filter thread rather than in it, so a filter usually stays fitted — but this page does not claim it

   Reversibility

   Not mentioned

   Material

   IMPACT-RESISTANT ABS, in the first bullet, with the second and third bullets crediting it with protection against accidental knocks for both camera and lens. The fourth adds rain and snow, which is the hood’s other job: it keeps water off the front element

   Amazon reference

   B0CN9CY26R (same reference on 5 Amazon marketplaces)

   EAN

   6940202320206

   • Three lenses named in full, plus the Olympus part number it replaces
   • Impact-resistant ABS, with protection from knocks stated three times
   • The shape is never stated

   Best for: An Olympus M.Zuiko 40-150 mm whose original LH-61D has been lost.

   ≈ £10 / 11 €

   Check price on Amazon
4. 

   CAMKIX Two rubber collapsible hoods plus a petal, 55 mm

   Eleven euros for two collapsible rubber hoods with three positions each, a tulip petal hood and a cap — the only hood here that can live on the lens permanently.

   Shape

   TWO, which is the point of the pack: two collapsible RUBBER hoods, cylindrical when extended, and one TULIP PETAL hood the fourth bullet names for wide-angle lenses, describing it as giving maximum shading without vignetting. Buying the two shapes together is how the shelf’s first question gets answered by having both

   Lenses named

   None individually — any 55 mm thread. The first bullet does the useful thing instead: it tells the buyer to verify the lens thread size before ordering and says the ⌀ value is on the front of the lens or under the cap

   Fitting method

   A thread, implied by 55 mm compatibility and never stated as such. On a rubber hood the thread matters less: the body flexes, so an imperfect orientation is absorbed

   Filter access

   Not addressed, though a cap is included — which suggests the cap fits the hood’s own front rather than the lens beneath it

   Reversibility

   SOMETHING BETTER: the third bullet describes a rubber hood that folds out in THREE STEPS for different levels of shading and collapses fully flat — so, in its own words, it can be left on the lens and is therefore always available. A hood that never comes off is a hood that gets used, which is the whole problem with hoods

   Material

   RUBBER for the two collapsible hoods, in the title and the first bullet. Rubber is the material that makes the three-step folding possible, and it also absorbs a knock that would crack ABS. The petal hood’s material is not named

   Amazon reference

   B07VH75Z98 (same reference on 6 Amazon marketplaces)

   EAN

   0711099327137

   • A rubber hood that collapses flat and can stay on the lens permanently
   • Three extension steps, so the shading suits the focal length in use
   • No individual lens named, so the petal’s scallops are cut for no particular angle

   Best for: A 55 mm lens used across a zoom range, where a hood that folds flat and never leaves the lens beats a deeper one left in a drawer.

   ≈ $8 / £8 / 11 €

   Check price on Amazon
5. 

   HUIPUXIANG EW-73D replacement, 67 mm, with its exclusions

   Eleven euros for an EW-73D replacement that names three Canon zooms it fits and, unusually, three versions of those same lenses it does not.

   Shape

   Not stated in words. The EW-73D is Canon’s petal design for these lenses, and a replacement necessarily copies its geometry — but the page names the part rather than the shape

   Lenses named

   THREE, AND THE EXCLUSIONS — which is what makes this the most careful page on this shelf. Compatible: the Canon RF 24-105 mm F4-7.1 IS STM, the EF-S 18-135 mm f/3.5-5.6 IS USM, and the RF 28-70 mm F2.8 IS STM. NOT compatible, stated in brackets: the RF 24-105 mm f/4L IS USM, and the EF-S 18-135 mm f/3.5-5.6 IS and IS STM versions. Canon sells lenses whose names differ by three letters and whose front diameters differ, and this page is the one that draws the line

   Fitting method

   Not stated. As a replacement for the EW-73D it mounts as that part does — a bayonet — and the page does not say so

   Filter access

   Not addressed

   Reversibility

   Not mentioned

   Material

   High-grade ABS plastic, black, in the fourth bullet. The fifth adds the usual double duty: protecting the lens from accidental damage, and keeping outside light from spoiling the picture

   Amazon reference

   B09VZF93YV (same reference on 6 Amazon marketplaces)

   EAN

   0645716621530

   • Three compatible lenses named, and three incompatible versions named too
   • A Canon part number — EW-73D — so the fit is unambiguous
   • The shape is never named, only the part it replaces

   Best for: One of the three named Canon zooms — checking the exact version first, because two of them have siblings this hood does not fit.

   ≈ $9 / £9 / 11 €

   Check price on Amazon
6. 

   CELLONIC Wide-angle, 46 mm, METAL, cylindrical

   The only metal hood on this shelf: a 46 mm cylindrical wide-angle design, named for the 7Artisans 25 mm f/1.8, at 13 €.

   Shape

   STATED, and in four words: round, cylindrical, tube — plus the title’s description of it as a WIDE-ANGLE hood. A cylindrical hood for a wide angle has to be shallow, which is exactly the compromise: it shades less than a deep hood and it never enters the frame

   Lenses named

   One, explicitly: the 7Artisans 25 mm f/1.8 with a 46 mm filter thread, in the fifth bullet, alongside a general claim covering camcorder, telephoto, macro and wide-angle lenses of that thread. Forty-six millimetres is a small thread, and naming a manual-focus prime tells you what kind of lens this is for

   Fitting method

   A 46 mm filter thread, named in the fourth and fifth bullets. On a cylindrical hood the thread is the right choice: there is no orientation to get wrong

   Filter access

   Not addressed

   Reversibility

   Not mentioned

   Material

   METAL, in the fourth bullet — and it is the only metal hood on this shelf, where five are plastic, ABS or rubber and one is unstated. Metal costs more, weighs more and does not crack; it also dents rather than breaking, which is the failure you can keep shooting with

   Amazon reference

   B07JC8SJC6 (same reference on 5 Amazon marketplaces)

   EAN

   4250843496607

   • Metal, alone on this shelf — it dents rather than cracking
   • The shape stated outright, and a wide-angle design that stays out of the frame
   • A shallow cylindrical hood shades less than a deep or petal one

   Best for: A small manual prime like the 7Artisans 25 mm f/1.8, where a metal hood matched to the lens beats a deeper plastic one.

   ≈ 13 €

   Check price on Amazon
7. 

   Canon ES-68, for EF lenses — three bullets in total

   Eighteen euros for Canon’s own ES-68 hood, whose specification consists of three words — the emptiest page on this shelf and the only one from the lens maker.

   Shape

   NOT STATED. The ES-68 is Canon’s own cylindrical hood for its EF 50 mm f/1.8 STM, but nothing on the page says so — not the shape, not the lens, not the diameter

   Lenses named

   NONE. The title says "für EF Objektive" — for EF lenses — and the EF mount covers hundreds of lenses across thirty years, of which the ES-68 fits one. It is the loosest compatibility statement on this shelf, from the only maker on it that built the lens

   Fitting method

   Not stated. Canon’s ES-68 is a bayonet hood, and the page does not say

   Filter access

   Not addressed

   Reversibility

   Not mentioned — on a hood that does reverse over the barrel

   Material

   NOT NAMED. Three bullets exist: durable; flexible design; quality/durability. That is the whole listing, and not one of the three words is a specification

   Amazon reference

   B00XHG4UUA (same reference on 6 Amazon marketplaces)

   EAN

   4549292037739

   • Canon’s own part, so the fit on the lens it was made for is exact
   • The part number ES-68 identifies it beyond doubt for anyone who knows it
   • Three bullets, none of which is a specification

   Best for: A Canon EF 50 mm f/1.8 STM, bought by part number because the page will not tell you anything else.

   ≈ £22 / 18 €

   Check price on Amazon