Skip to content

Three lenses named, by their full designations

JJC LHJ61DBK, for M.Zuiko 40-150 mm, LH-61D replacement

A dedicated hood for three named Olympus zooms in impact-resistant ABS, replacing the LH-61D for 11 €.

JJC lens hood fitted to an Olympus M.Zuiko 40-150 mm zoom

JJC LHJ61DBK, for M.Zuiko 40-150 mm, LH-61D replacement

A dedicated hood for three named Olympus zooms in impact-resistant ABS, replacing the LH-61D for 11 €.

Shape
NOT STATED — which on a dedicated hood matters less than anywhere else on this shelf. A hood cut for one specific lens is shaped to that lens’s angle of view by design, whatever the page calls it: the maker has already done the geometry that a universal hood leaves to the buyer
Lenses named
THE MOST PRECISE ON THIS SHELF: three full designations — M.Zuiko Digital ED 40-150 mm F4.0-5.6, M.Zuiko Digital ED 40-150 mm F4-5.6 R, and Zuiko Digital ED 40-150 mm F4.0-5.6 — plus the part it replaces, the Olympus LH-61D. Naming the original hood is the detail that settles compatibility beyond argument
Fitting method
Not stated. A hood sold as a replacement for a specific Olympus part fits the way that part did — a bayonet — but the page does not say so, and it is the one specification a dedicated hood should not have to leave out
Filter access
Not addressed. A bayonet hood mounts outside the filter thread rather than in it, so a filter usually stays fitted — but this page does not claim it
Reversibility
Not mentioned
Material
IMPACT-RESISTANT ABS, in the first bullet, with the second and third bullets crediting it with protection against accidental knocks for both camera and lens. The fourth adds rain and snow, which is the hood’s other job: it keeps water off the front element
Amazon reference
B0CN9CY26R (same reference on 5 Amazon marketplaces)
EAN
6940202320206
  • Three lenses named in full, plus the Olympus part number it replaces
  • Impact-resistant ABS, with protection from knocks stated three times
  • The shape is never stated

Best for: An Olympus M.Zuiko 40-150 mm whose original LH-61D has been lost.

≈ £10 / 11 €
Check price on Amazon

Specifications

Shape
NOT STATED — which on a dedicated hood matters less than anywhere else on this shelf. A hood cut for one specific lens is shaped to that lens’s angle of view by design, whatever the page calls it: the maker has already done the geometry that a universal hood leaves to the buyer
Lenses named
THE MOST PRECISE ON THIS SHELF: three full designations — M.Zuiko Digital ED 40-150 mm F4.0-5.6, M.Zuiko Digital ED 40-150 mm F4-5.6 R, and Zuiko Digital ED 40-150 mm F4.0-5.6 — plus the part it replaces, the Olympus LH-61D. Naming the original hood is the detail that settles compatibility beyond argument
Fitting method
Not stated. A hood sold as a replacement for a specific Olympus part fits the way that part did — a bayonet — but the page does not say so, and it is the one specification a dedicated hood should not have to leave out
Filter access
Not addressed. A bayonet hood mounts outside the filter thread rather than in it, so a filter usually stays fitted — but this page does not claim it
Reversibility
Not mentioned
Material
IMPACT-RESISTANT ABS, in the first bullet, with the second and third bullets crediting it with protection against accidental knocks for both camera and lens. The fourth adds rain and snow, which is the hood’s other job: it keeps water off the front element
Amazon reference
B0CN9CY26R (same reference on 5 Amazon marketplaces)
EAN
6940202320206

On the listing

Five short bullets. Made of impact-resistant ABS plastic; additional protection against accidental impact; further protection for camera and lens; reduces unwanted light and protects the front of the lens from rain and snow; and compatibility with the Olympus M.Zuiko Digital ED 40-150 mm F4.0-5.6, the M.Zuiko Digital ED 40-150 mm F4-5.6 R and the Zuiko Digital ED 40-150 mm F4.0-5.6, as a replacement for the Olympus LH-61D.

Three lenses, and the part it replaces

The most complete compatibility statement on this shelf. Naming the LH-61D settles the question that thread sizes and angles of view only approximate.

A dedicated hood does the geometry for you

Cut for one angle of view, it shades as deeply as the frame allows. A universal hood splits the difference between every lens it might meet.

Impact-resistant ABS, and it says why three times

Knocks, then knocks again, then rain and snow. A hood is what meets the door frame first.

Rain and snow, on the list

Light is the usual argument. Water on the front element is the other one, and this page makes it.

What eleven euros does not say

Its shape, or how it mounts. On a hood built for three named lenses, the maker has already decided both.

Availability

Between 11 € and 16 € on the German, French, Italian and Spanish Amazon stores when this page was last checked.

The British Amazon store carry it too, priced in local currency. Those amounts are deliberately absent from the range above, which reads euro stores only.

Nothing came back from the American Amazon store at all, so the button for that country runs a search instead of opening an entry that is not there.

Everything in this section is the figure Keepa carried on the day of the last update to this page. Availability and prices shift without notice.

Prices quoted in this text were read on 13 September 2026. The live price is at the top of the page.

More lens hoods

  • YRTIYO black plastic lens hood threaded onto a 58 mm kit lens

    YRTIYO 58 mm, screw mount, plastic

    Five euros for a 58 mm screw-on hood for the Canon 18-55 mm kit lens — four bullets, one of which is the word "plastic".

    Shape
    NOT STATED. Neither petal, tulip, flower nor cylindrical appears in four bullets — and shape is the first thing this shelf compares, because it decides whether a hood works on a zoom. A cylindrical hood sized for 55 mm vignettes at 18; a petal hood is cut away at the corners precisely so it does not
    Lenses named
    One lens and nine bodies: the Canon EF-S 18-55 mm, with EOS 4000D, 3000D, 2000D, 90D, 80D, 77D, 250D, 1500D and 1300D. Naming the lens is what matters — a hood belongs to a focal length, not to a camera — and the fourth bullet widens it to all 58 mm lenses, which is a different and looser claim
    Fitting method
    SCREW MOUNTING, in the second bullet, described as easy to install and remove. A screw hood threads into the filter ring, which means it occupies the thread a filter would use — and turns to a random orientation, which matters on any hood that is not cylindrical
    Filter access
    NOT ADDRESSED. With the hood in the filter thread, whether a filter can sit underneath or in front is the question this page leaves unanswered
    Reversibility
    NOT MENTIONED. A hood that reverses over the barrel travels in the bag; one that does not is carried separately or left at home
    Material
    PLASTIC — three words in the third bullet, and that is the whole entry. Plastic is normal at 5 €; the 18 € Canon on this shelf publishes nothing more specific
    Amazon reference
    B091MSQ962 (same reference on 6 Amazon marketplaces)
    EAN
    0685330065846
    • Five euros, the cheapest on this shelf, for the commonest kit lens there is
    • A screw mount, which cannot be knocked off like a bayonet
    • The shape is never stated, which is what this shelf is compared on

    Best for: A Canon 18-55 mm kit lens that needs something over the front element for 5 €, used mostly at the long end.

    ≈ 5 €
    Check price on Amazon
  • K&F Concept petal lens hood showing its scalloped edges and matt inner surface

    K&F CONCEPT 58 mm petal, screw mount, matt interior

    A petal hood with a matt interior for 8 € — and a page that tells you it vignettes below 25 mm and will not take a filter underneath.

    Shape
    PETAL, in the title — the scalloped shape whose corners are cut away so a wide frame does not see them. It is the shape the hub above compares first, and it is the only page on this shelf to name it apart from the 11 € CAMKIX, which supplies one alongside two rubber hoods
    Lenses named
    NONE individually. The sixth bullet claims every 58 mm Canon, Nikon, Sony, Pentax, Olympus and Fuji lens — a thread rather than a lens, which is honest for a universal hood and less useful than the named Olympus of the 11 € JJC here. A petal hood on an unspecified lens is a compromise: the scallops are cut for one angle of view, not for all of them
    Fitting method
    SCREW MOUNTING, in the second bullet, described as more secure than the alternative. On a petal hood a screw mount is a real drawback: the scallops must align with the corners of the frame, and a thread stops wherever friction stops it
    Filter access
    REFUSED, and the page says so itself: the fourth bullet states it cannot be mounted together with a filter. That is the clearest statement on this shelf and a genuine limitation — a UV or polarising filter and this hood cannot both be on the lens
    Reversibility
    Not mentioned
    Material
    Not named. What IS named is the surface that matters: a MATT INTERIOR, in the fifth bullet, credited with preventing or limiting stray light from direct light on the front of the lens. A shiny hood interior reflects light into the lens and undoes the hood’s purpose
    Amazon reference
    B0D25DXNG2 (same reference on 6 Amazon marketplaces)
    EAN
    6942052528818
    • A petal shape, and a matt interior named as the reason it works
    • Two limits stated by the maker: 25 mm vignetting, and no filter underneath
    • A screw mount on a petal hood, which cannot be aligned reliably

    Best for: A 58 mm lens at 25 mm or longer, used without a filter, where a matt-lined petal hood for 8 € is the point.

    ≈ $9 / £9 / 8 €
    Check price on Amazon
  • CamKix set of two rubber collapsible hoods, a tulip hood and a lens cap

    CAMKIX Two rubber collapsible hoods plus a petal, 55 mm

    Eleven euros for two collapsible rubber hoods with three positions each, a tulip petal hood and a cap — the only hood here that can live on the lens permanently.

    Shape
    TWO, which is the point of the pack: two collapsible RUBBER hoods, cylindrical when extended, and one TULIP PETAL hood the fourth bullet names for wide-angle lenses, describing it as giving maximum shading without vignetting. Buying the two shapes together is how the shelf’s first question gets answered by having both
    Lenses named
    None individually — any 55 mm thread. The first bullet does the useful thing instead: it tells the buyer to verify the lens thread size before ordering and says the ⌀ value is on the front of the lens or under the cap
    Fitting method
    A thread, implied by 55 mm compatibility and never stated as such. On a rubber hood the thread matters less: the body flexes, so an imperfect orientation is absorbed
    Filter access
    Not addressed, though a cap is included — which suggests the cap fits the hood’s own front rather than the lens beneath it
    Reversibility
    SOMETHING BETTER: the third bullet describes a rubber hood that folds out in THREE STEPS for different levels of shading and collapses fully flat — so, in its own words, it can be left on the lens and is therefore always available. A hood that never comes off is a hood that gets used, which is the whole problem with hoods
    Material
    RUBBER for the two collapsible hoods, in the title and the first bullet. Rubber is the material that makes the three-step folding possible, and it also absorbs a knock that would crack ABS. The petal hood’s material is not named
    Amazon reference
    B07VH75Z98 (same reference on 6 Amazon marketplaces)
    EAN
    0711099327137
    • A rubber hood that collapses flat and can stay on the lens permanently
    • Three extension steps, so the shading suits the focal length in use
    • No individual lens named, so the petal’s scallops are cut for no particular angle

    Best for: A 55 mm lens used across a zoom range, where a hood that folds flat and never leaves the lens beats a deeper one left in a drawer.

    ≈ $8 / £8 / 11 €
    Check price on Amazon

Elsewhere in the camera bag

  • NiSi True Color variable ND filter with its knurled ring and click-stop markings

    NiSi True Color VND, 82 mm, 1 to 5 stops, no X

    One to five stops in five clicks with no X effect, a coating sold on neutrality and vignetting-free use at 16 mm — the variable ND that trades range for quality, at 186 €.

    Strength
    1 to 5 stops, in the title — deliberately HALF the range of the 29 € K&F here, and the restriction is the point. A variable ND misbehaves at its extremes; stopping at five keeps the filter inside the range where two polarisers still darken evenly
    Notations given
    A THIRD system: ND0.3 to ND1.5 in optical DENSITY, alongside stops in the title. Density is logarithmic — 0.3 is one stop, 1.5 is five — and it is the notation used on cinema filters. Between this page, the K&F’s ND2-400 and the stop figures, this shelf carries three ways of saying the same thing, which is why the hub above asks which notation is given
    Fixed or variable construction
    VARIABLE with FIVE DEFINED CLICK-STOPS, in the second bullet — and clicks are what a variable ND usually lacks. A continuous ring cannot be returned to the same setting twice; five detents mean the third stop is the third stop on every shot of a sequence
    Thread size
    82 mm, in the title — the largest thread in this catalogue, and the size the buying advice above says to buy for and step down from
    Stated colour cast
    ADDRESSED DIRECTLY, alone on this shelf: the first bullet says the exclusive True Color coating prevents the yellow cast common to other brands and guarantees absolutely neutral reproduction with no colour falsification. On a variable ND the yellowing at strong settings is the defect people complain about, and this is the page that names it
    Coatings
    UP TO TWENTY anti-reflective layers, in the third bullet, with double-sided water- and oil-resistant coatings. Fewer than the thirty the NEEWER polariser on this site publishes; more than the unnumbered coating of the 29 € K&F here
    Frame thickness
    NOT PUBLISHED as a figure. What the fourth bullet gives instead is the engineering: a LARGER FRONT THREAD to avoid vignetting at 16 mm, and a matt black interior to absorb stray light. Sixteen millimetres is a specific, checkable claim, where the K&F here says not below 35
    Amazon reference
    B09K57XSZS (same reference on 6 Amazon marketplaces)
    EAN
    6972949372941
    • No X effect, stated explicitly — the failure a variable ND is known for
    • Five defined click-stops, so a setting can be returned to exactly
    • One to five stops, half the range of the 29 € K&F

    Best for: Video and wide-angle landscape work where the filter has to stay neutral, return to a known setting, and work at 16 mm.

    ≈ $245 / £178 / 186 €
    Check price on Amazon
  • K&F Concept 67 mm circular polariser held against a bright sky

    K&F CONCEPT 67 mm CPL, 18 layers, 5.3 mm frame

    Eighteen coating layers in a published 5.3 mm frame — the thinner of the two polariser frames on this shelf, for 18 €.

    Thread size
    67 mm, in the title, with the fifth bullet naming Canon, Nikon, Sony, Samsung and FUJIFILM lenses of that thread
    Type
    CIRCULAR — Zirkularer Polfilter — in the title and the third bullet. The hub above explains why that matters: a circular polariser leaves autofocus and metering intact on a modern body
    Light loss stated
    NOT STATED, as on all four polarisers here. Eighteen layers raise transmission; what the polarising element itself takes out is the figure the hub above asks for, and no page on this shelf gives it
    Coating description
    EIGHTEEN-fold coating on high-grade optical glass, in the third bullet, credited with reducing reflections and holding image quality in difficult light. The highest count on this shelf, matching the same maker’s UV filter
    Frame thickness
    PUBLISHED at 5.3 mm, in the fourth bullet, described as an ultra-slim aluminium frame that prevents vignetting even on wide-angle shots. It is the thinner of the two polariser frames published here — the 28 € NEEWER gives 5.9 mm — and the reason is stated rather than implied
    Rotation mechanism
    Not described. The frame thickness is published and how the ring turns is not
    Amazon reference
    B08HS3ZWYY (same reference on 6 Amazon marketplaces)
    EAN
    6942052508506
    • Five point three millimetres of frame, published with the reason: no vignetting on a wide lens
    • Eighteen coating layers, the highest count on this shelf
    • No light loss published

    Best for: A wide-angle or standard zoom at 67 mm where the frame has to stay out of the corners of the picture.

    ≈ £23 / 18 €
    Check price on Amazon
  • NiSi True Color CPL filter with its knurled frame and blackened glass edge

    NiSi True Color CPL, 77 mm, 20 layers, Cine Sealed

    A hundred and two euros for a polariser whose coating is sold on colour neutrality and whose glass edges are blackened and sealed against condensation.

    Thread size
    77 mm, in the title — the largest on this shelf, and the size the buying advice above says to standardise on, since a step ring brings it down to everything smaller
    Type
    CIRCULAR, in the title. The hub above puts circular versus linear first for a reason: only the circular kind leaves autofocus and metering working
    Light loss stated
    NOT STATED in stops. The first bullet claims 99.9 per cent of light reflections eliminated — the same figure the 28 € NEEWER here publishes — and the exposure penalty a polariser imposes is absent from all four pages on this shelf
    Coating description
    TWENTY layers, in the third bullet, including an ULTRA-LOW-REFLECTION layer specified at 0.2 PER CENT, with double-sided water- and oil-repellent coatings for easy cleaning and scratch resistance. Fewer layers than the thirty of the NEEWER; the difference on this page is what the coating is claimed to preserve rather than how many there are
    Frame thickness
    NOT PUBLISHED — the one number this page omits, at 102 €. The fifth bullet claims no vignetting even on wide-angle lenses and gives no millimetres, where the 18 € K&F publishes 5.3 mm and the 28 € NEEWER 5.9 mm. What IS named is a matt black interior coating in the second bullet, to absorb stray light inside the frame
    Rotation mechanism
    A KNURLED frame — gerändelter Rahmen — in the fifth bullet, described as giving grip for quick mounting and removal. That is about fitting rather than turning; the 28 € NEEWER here is the page that describes the rotation itself
    Amazon reference
    B09XQXPG3C (same reference on 6 Amazon marketplaces)
    EAN
    6972949374020
    • A coating sold on colour neutrality, with the yellow cast of other filters named as the problem
    • Cine Sealed blackened glass edges, credited with preventing condensation
    • No frame thickness published, at 102 €

    Best for: Work where the polariser must not tint the image — video graded across shots, or landscape work in mixed light — and where condensation on a cold morning is a real risk.

    ≈ $129 / £95 / 102 €
    Check price on Amazon

All lens hoods