Skip to content

Four controls duplicated, and two cells

ayex For EOS 6D Mark II, two LP-E6, four controls

Fifty-eight euros for the fullest vertical grip here: two LP-E6 cells and four duplicated controls on the EOS 6D Mark II, after the BG-E21.

ayex battery grip on a Canon EOS 6D Mark II showing its portrait controls

ayex For EOS 6D Mark II, two LP-E6, four controls

Fifty-eight euros for the fullest vertical grip here: two LP-E6 cells and four duplicated controls on the EOS 6D Mark II, after the BG-E21.

Bodies named
ONE: the Canon EOS 6D Mark II, in the title and the first bullet, with the fourth naming the Canon BG-E21 as the design it follows. A single body is the narrowest compatibility on this shelf and the most certain — a grip is cut to one chassis
Cells carried and reporting
TWO LP-E6, published in the second bullet, which says the grip allows two cells to be used so there is no constant recharging or swapping — and the first bullet puts it as doubling the camera’s capability. Whether the body reports each cell separately is not described
Duplicated controls
THE FULLEST SET ON THIS SHELF, in the fifth bullet: a shutter release with TWO PRESSURE POINTS — half press for focus, full press to fire — an AF-ON button, an AE/FE lock and further functions, all placed for portrait-format use. Four controls against the one of the 38 € CELLONIC here
Sealing claims
None
Tripod thread position
The third bullet says the grip is FIXED TO THE CAMERA’S TRIPOD THREAD — which states how it mounts and, like every page on this shelf, never confirms that a replacement thread exists underneath
Published weight
None
Amazon reference
B0799NLHWZ (same reference on 6 Amazon marketplaces)
EAN
4250559526827
  • Four duplicated controls, including AF-ON and AE/FE lock
  • Two LP-E6 cells, doubling the run time
  • One body only — nothing else takes it

Best for: An EOS 6D Mark II used for portraits or weddings, where the vertical hold has to offer the same controls as the horizontal one.

≈ £62 / 51 €
Check price on Amazon

Specifications

Bodies named
ONE: the Canon EOS 6D Mark II, in the title and the first bullet, with the fourth naming the Canon BG-E21 as the design it follows. A single body is the narrowest compatibility on this shelf and the most certain — a grip is cut to one chassis
Cells carried and reporting
TWO LP-E6, published in the second bullet, which says the grip allows two cells to be used so there is no constant recharging or swapping — and the first bullet puts it as doubling the camera’s capability. Whether the body reports each cell separately is not described
Duplicated controls
THE FULLEST SET ON THIS SHELF, in the fifth bullet: a shutter release with TWO PRESSURE POINTS — half press for focus, full press to fire — an AF-ON button, an AE/FE lock and further functions, all placed for portrait-format use. Four controls against the one of the 38 € CELLONIC here
Sealing claims
None
Tripod thread position
The third bullet says the grip is FIXED TO THE CAMERA’S TRIPOD THREAD — which states how it mounts and, like every page on this shelf, never confirms that a replacement thread exists underneath
Published weight
None
Amazon reference
B0799NLHWZ (same reference on 6 Amazon marketplaces)
EAN
4250559526827

On the listing

Five bullets. Comfortable portrait-format photography, an ergonomic grip for a secure hold and easy operation in portrait orientation with all important buttons within reach, doubling the capability of the EOS 6D Mark II; more power for longer sessions, allowing two LP-E6 cells so there is no constant recharging or battery swapping; simple setup and handling, installed quickly by inserting the batteries and fixing it to the camera’s tripod thread; a perfectly matched design, seamless and modelled on the BG-E21 grip for optimal fit and function; and versatile button functions — a shutter release with two pressure points, an AF-ON button, an AE/FE lock and further functions for precise control.

Four controls, in portrait orientation

A release with a half press, AF-ON, and an AE/FE lock. Turn the camera on its side and everything still works the way it does the other way up.

Two LP-E6 cells

Not a spare in a drawer: two in the grip, and the body draws from both. The second bullet calls it the end of swapping mid-session.

One camera, and the grip it copies

The EOS 6D Mark II, and the Canon BG-E21. A grip is cut to one chassis, and naming the original settles what it does.

What the BG-E21 had that this page does not claim

Weather sealing. Canon’s original was sealed; this listing never raises the subject.

Fitted to the tripod thread

Which is how every vertical grip mounts — and no page on this shelf confirms the replacement thread underneath.

Availability

Between 51 € and 65 € on the German, French, Italian and Spanish Amazon stores when this page was last checked.

The British Amazon store carry it too, priced in local currency. Those amounts are deliberately absent from the range above, which reads euro stores only.

Listed in the American Amazon catalogue with nothing on sale against the entry: the camera has a page there and no seller behind it.

Everything in this section is the figure Keepa carried on the day of the last update to this page. Availability and prices shift without notice.

Prices quoted in this text were read on 13 September 2026. The live price is at the top of the page.

More battery grips

  • CELLONIC vertical battery grip fitted beneath a Nikon reflex body

    CELLONIC Vertical grip for Nikon D40 to D5000, portrait release

    Thirty-eight euros for a true vertical grip for five Nikon bodies, with a portrait shutter release and a spare cell — and no mention of dials, threads or weight.

    Bodies named
    FIVE, in the first bullet: the Nikon D5000, D3000, D60, D40 and D40x, for EN-EL9 and EN-EL9E cells — and the part-number field names the Nikon MB-D60, the original grip this copies. Naming the original is the clearest compatibility statement available
    Cells carried and reporting
    A SPARE BATTERY is included, in the fifth bullet, for longer sessions and continuous use. How many cells the grip holds, and whether the camera reads them individually, is not stated — which on a grip is the specification a photographer checks first
    Duplicated controls
    A SHUTTER RELEASE FOR PORTRAIT-FORMAT SHOOTING, in the third bullet — and that is what makes this a grip rather than a battery holder. What it does NOT claim is what the 58 € ayex here does: command dials, an AF-ON button, an exposure lock. One duplicated control, named
    Sealing claims
    None
    Tripod thread position
    NOT DESCRIBED. A vertical grip bolts into the camera’s own tripod socket and must provide a replacement underneath, or the camera cannot go on a tripod at all. The page never mentions it, on a product whose whole installation depends on that thread
    Published weight
    None
    Amazon reference
    B0BM9RT2D6 (same reference on 5 Amazon marketplaces)
    EAN
    4063714126004
    • A genuine portrait-format shutter release, and the MB-D60 named as its pattern
    • Five Nikon bodies listed individually, with both EN-EL9 cell types
    • No tripod thread described, on a grip that occupies the camera’s own

    Best for: A Nikon D40 through D5000 shot in portrait format for hours — weddings, portraits — where the wrist should stay straight.

    ≈ £42 / 38 €
    Check price on Amazon
  • Insta360 battery grip with its integrated tripod legs unfolded

    Insta360 For Luna series, 1000 mAh, integrated tripod

    Ninety euros for a 1000 mAh grip whose handle unfolds into a tripod — the only integrated tripod here, from a page of three bullets.

    Bodies named
    The Insta360 Luna SERIES, in the title, with no individual model named. A range rather than a camera, which for an accessory sold by the camera’s own maker is a safe claim and a vague one
    Cells carried and reporting
    1000 mAh built in, in the first bullet — the SMALLEST capacity on this shelf, a fifth of the 5000 mAh K&F handle — with the useful addition that it charges cameras AND mobile devices. A grip that also fills a phone is a grip that earns its place in a pocket
    Duplicated controls
    NONE
    Sealing claims
    None
    Tripod thread position
    BOTH, and this is what the page has that nothing else here does: an INTEGRATED TRIPOD in the handle, described in the second bullet as quickly ready for stable, efficient shooting, PLUS a standard quarter-inch thread on the underside of the grip for external accessories. A handle that stands up on its own is a handle that becomes a table-top stand without a second purchase
    Published weight
    NONE, in a page of three bullets
    Amazon reference
    B0GYWBCPZH (same reference on 6 Amazon marketplaces)
    EAN
    0842126120497
    • A tripod folded into the handle — the only one on this shelf
    • A quarter-inch thread underneath as well, for anything else
    • One thousand milliamp-hours, the smallest capacity here

    Best for: An Insta360 Luna used for talking-to-camera pieces, where the handle has to stand on a table and top up a phone.

    ≈ $80 / £76 / 90 €
    Check price on Amazon
  • DJI Osmo Action dual-direction battery grip with its charging port cover

    DJI 4900 mAh, 207 g, −20 to 45 °C, Osmo Action 6

    Eighty-four euros for a grip that publishes its dimensions, its 207 g, its voltages and two temperature ranges — and gives two different capacities.

    Bodies named
    ONE: the Osmo Action 6, in the second bullet. A single named camera, which for an action camera accessory is the honest form — the mounting and the port position change between generations
    Cells carried and reporting
    TWO DIFFERENT FIGURES ON ONE PAGE: the first bullet says a built-in 4900 mAh battery, and the third gives a storage capacity of 5000 mAh. A hundred milliamp-hours apart, neither reconciled. What IS consistent is the electrical detail — 3.6 V nominal, USB input at 3.6 V, USB output at 5 V and 1.5 A — which is more than any other grip here publishes
    Duplicated controls
    NONE — a power grip, like three others on this shelf
    Sealing claims
    PARTIAL, AND CONDITIONAL — and the fourth bullet is unusually careful: after removing the camera’s USB-C port cover, the charging-port cover must be installed TO MAINTAIN splash resistance. In other words, fitting the grip breaks the camera’s seal unless a supplied part is put back. That is a real instruction, and the only sealing statement on this shelf
    Tripod thread position
    Not mentioned, which on a 181 mm handle is a genuine omission
    Published weight
    207 g, in the third bullet, alongside DIMENSIONS of 37.8 by 44.2 by 181 mm. It is the only grip on this shelf to publish both — and 181 mm of length is what makes it a handle rather than a pack
    Amazon reference
    B0FM3WMZ6Z (same reference on 6 Amazon marketplaces)
    EAN
    0190021153141
    • Dimensions, weight, three voltages and two temperature ranges all published
    • A splash-proof charging cover supplied, with the instruction to fit it
    • Four thousand nine hundred mAh in one bullet, 5000 in another

    Best for: An Osmo Action 6 filming in the cold, where an operating range down to −20 °C and a published weight decide the rig.

    ≈ $129 / £83 / 84 €
    Check price on Amazon

Elsewhere in the camera bag

  • K&F Concept camera bag opened from both sides showing its EVA dividers

    K&F CONCEPT 27 by 17 by 10.5 cm inside, five ways to wear it

    Twenty-seven by 17 by 10.5 cm inside, three compartments, removable dividers and straps underneath for a light tripod — worn five ways, at 41 €.

    Internal dimensions
    PUBLISHED: 27 by 17 by 10.5 cm, in the first bullet, described as holding one body and two lenses. It is the largest published interior on this shelf and the figure that matters most — nearly five litres of usable space
    Volume
    Not published. The dimensions give roughly 4.8 litres, and the page leaves it as equipment instead
    Access design
    A DOUBLE-PULLER design opening from the LEFT AND THE RIGHT, in the third bullet — so the bag can be opened from whichever side the hand is on — with the two zip rings bucklable to one another as an ANTI-THEFT measure. That is a genuine feature on a shoulder bag worn in a crowd
    Divider system
    The fullest on this shelf: professional EVA lens partitions that are REMOVABLE, over 10 mm of high-density EPE shock-absorbing padding, and THREE compartments in the fourth bullet — equipment, accessories and personal items kept separate so they do not disturb one another
    Laptop sleeve size
    None
    Tripod carry
    YES — DOUBLE STRAPS on the underside, in the fourth bullet, for a light tripod or a table tripod. It is the only tripod provision on this shelf besides the 49 € TARION, and the page is honest about the limit: light tripods, not a full-height one
    Weather protection
    Waterproof fabric, scratch-resistant and wear-resistant, in the second bullet
    Empty weight
    Not published
    Amazon reference
    B0CV7HSBZL (same reference on 6 Amazon marketplaces)
    EAN
    6942052569415
    • Twenty-seven by 17 by 10.5 cm published, the largest interior on this shelf
    • Removable EVA dividers over 10 mm of EPE padding, in three compartments
    • No laptop sleeve, and no empty weight

    Best for: One body and two lenses carried in a crowd, where the bag has to open from either side and the dividers should come out.

    ≈ $35 / 41 €
    Check price on Amazon
  • TARION TR-L camera backpack with its side access open and rain cover beside it

    TARION TR-L, 2 bodies and 5 lenses, 14-inch laptop, rain cover

    Forty-nine euros for the only real rucksack here: two bodies, five lenses, a 14-inch laptop, side and rear access, and a rain cover in the box.

    Internal dimensions
    NOT PUBLISHED — the one omission on an otherwise thorough page. Capacity is given as equipment instead, in the first bullet: two cameras and five lenses, in what it calls an efficient interior design that keeps the bag compact
    Volume
    Not published
    Access design
    THE FULLEST ON THIS SHELF, in the second and third bullets: TWELVE compartments and pockets; SIDE ACCESS reaching the camera WITHOUT taking the bag off; and a THEFT-RESISTANT REAR opening into the main compartment — which is the arrangement that puts the zips against your own back when the bag is worn
    Divider system
    Described as an efficient interior design and never itemised. For two bodies and five lenses the dividers are the whole architecture, and the page leaves them to the photographs
    Laptop sleeve size
    14 INCHES, expandable, on the back — in the second bullet, and the ONLY laptop provision on this shelf. A rucksack that takes a laptop is a rucksack that replaces a second bag
    Tripod carry
    Not explicitly named, which on a rucksack of this capacity is surprising. The 41 € K&F here publishes underside straps for a light tripod
    Weather protection
    Two layers of answer, in the fifth bullet: water-repellent 1200D NYLON with very high tear and abrasion resistance, AND A WATERPROOF RAIN COVER INCLUDED. The cover is what separates water-repellent from waterproof, and it is in the box
    Empty weight
    Not published, as on all four bags on this shelf
    Amazon reference
    B09FL6XXSN (same reference on 6 Amazon marketplaces)
    EAN
    5060989790076
    • Two bodies and five lenses, with a 14-inch laptop sleeve — alone on this shelf
    • Side access without removing the bag, plus a theft-resistant rear opening
    • No internal dimensions and no volume published

    Best for: A full kit and a laptop carried on foot and through an airport, where the camera has to come out without the bag coming off.

    ≈ £60 / 49 €
    Check price on Amazon
  • Lowepro GearUp Creator Box Large II open showing its dividers and lenses

    Lowepro GearUp Creator Box Large II, QuickDoor, 82 % recycled

    A padded case that goes inside a rucksack and opens without coming out — one body, three lenses, and 82 per cent recycled materials.

    Internal dimensions
    NOT PUBLISHED, and it is the specification this product most needs: a case designed to sit inside another bag has to be measured against that bag’s interior. What the first bullet gives instead is a capacity in equipment — a full-frame mirrorless body with a standard zoom attached, plus two more lenses
    Volume
    Not published
    Access design
    THE QUICKDOOR SYSTEM, in the fourth bullet, and it is what this product is for: the case opens and the equipment comes out WHILE the case is still inside another bag. No unpacking to reach a lens — which is the whole friction of carrying a camera in a rucksack
    Divider system
    FLEXIBLE COMPARTMENTS, in the first bullet, arranged for a full-frame mirrorless body with a standard zoom fitted and two additional lenses, with two further pockets for small items. It is the only itemised divider arrangement on this shelf
    Laptop sleeve size
    NONE — and correctly so. The laptop travels in the outer bag; this case holds only the camera
    Tripod carry
    None
    Weather protection
    NOT CLAIMED anywhere. A case that lives inside a rucksack is sheltered by the rucksack, so the omission is defensible — but it means this case alone offers no protection from rain
    Empty weight
    Not published. On a case whose purpose is to go inside something else, the weight it adds is exactly what a buyer would want to know
    Amazon reference
    B0BLZG4SN6 (same reference on 6 Amazon marketplaces)
    EAN
    8024221726213
    • QuickDoor access without taking the case out of the bag it lives in
    • Dividers itemised for a body with a zoom fitted plus two lenses
    • No internal dimensions published, on a case that must fit inside another bag

    Best for: A rucksack or holdall that already exists, turned into a camera bag without buying a camera bag.

    ≈ $55 / £34 / 34 €
    Check price on Amazon

All battery grips