Skip to content

Two plates, fully dimensioned, for 14 €

Rollei QAL-50, 49 by 41 by 10 mm, 45 g, two-pack

Two Arca-compatible plates for 14 €, each 49 by 41 by 10 mm and 45 g — the only page on this shelf to publish all three dimensions and a weight.

Pair of Rollei QAL-50 quick release plates in black aluminium with their fixing screws

Rollei QAL-50, 49 by 41 by 10 mm, 45 g, two-pack

Two Arca-compatible plates for 14 €, each 49 by 41 by 10 mm and 45 g — the only page on this shelf to publish all three dimensions and a weight.

Profile
Arca Swiss compatible, named in the title. The hub above is careful about what that means: the dovetail associated with Arca is cut by many makers to broadly compatible dimensions and published as a standard by none of them, so two plates of the same nominal type can sit differently in the same clamp. Naming it is still what makes a plate interoperable, and only two pages on this shelf do
Length
49 mm, with the full block published in the third bullet: 49 by 41 by 10 mm. Short, which is what it is — this is a plate for a camera base, not a long rail for balancing a telephoto
Screw type and drive
A 1/4 inch tripod thread, in the second bullet, and the drive is never named. The buying advice for this shelf is to take a plate with a folding D-ring, because a coin-slot plate needs a coin at the moment one is never to hand — and this page does not say which it is
Anti-twist provision
Not described. No lip, no rubber pad and no body-specific shaping appears, so what stops the plate rotating under a long lens is unstated. On a 49 mm plate with a single screw, that is the question
Stated clamp compatibility
All cameras with a 1/4 inch tripod thread, in the second bullet, plus the Arca compatibility in the title. Two statements covering both halves: what it screws into, and what it slides into
Material
Aluminium, in the third bullet, alongside the dimensions and the weight
Published weight
45 g each, in the third bullet. It is the lightest figure on this shelf, and the fourth bullet confirms two plates are supplied
Amazon reference
B008AH6X3I (same reference on 6 Amazon marketplaces)
EAN
4048805208685
  • Two plates for 14 €, so a second body is covered by the same purchase
  • All three dimensions and the weight published — 49 by 41 by 10 mm at 45 g
  • The screw drive is never named, so whether it needs a coin or a D-ring is unknown

Best for: A second and third plate for cameras that stay on Arca clamps, where the price per plate matters more than the fittings.

≈ £18 / 14 €
Check price on Amazon

Specifications

Profile
Arca Swiss compatible, named in the title. The hub above is careful about what that means: the dovetail associated with Arca is cut by many makers to broadly compatible dimensions and published as a standard by none of them, so two plates of the same nominal type can sit differently in the same clamp. Naming it is still what makes a plate interoperable, and only two pages on this shelf do
Length
49 mm, with the full block published in the third bullet: 49 by 41 by 10 mm. Short, which is what it is — this is a plate for a camera base, not a long rail for balancing a telephoto
Screw type and drive
A 1/4 inch tripod thread, in the second bullet, and the drive is never named. The buying advice for this shelf is to take a plate with a folding D-ring, because a coin-slot plate needs a coin at the moment one is never to hand — and this page does not say which it is
Anti-twist provision
Not described. No lip, no rubber pad and no body-specific shaping appears, so what stops the plate rotating under a long lens is unstated. On a 49 mm plate with a single screw, that is the question
Stated clamp compatibility
All cameras with a 1/4 inch tripod thread, in the second bullet, plus the Arca compatibility in the title. Two statements covering both halves: what it screws into, and what it slides into
Material
Aluminium, in the third bullet, alongside the dimensions and the weight
Published weight
45 g each, in the third bullet. It is the lightest figure on this shelf, and the fourth bullet confirms two plates are supplied
Amazon reference
B008AH6X3I (same reference on 6 Amazon marketplaces)
EAN
4048805208685

On the listing

Four short bullets. A professional camera quick-release plate; a fit for all cameras with a 1/4 inch tripod thread; aluminium, measuring 49 by 41 by 10 mm and weighing 45 g; and a box containing two QAL-50 plates.

Forty-nine by forty-one by ten

Every dimension and the weight, on the cheapest item on this shelf. Three other pages here describe their plates in adjectives or give one figure; this one publishes the block. For anyone checking whether a plate clears a battery door or fouls a lens collar, that is the answer.

Two plates, one per camera

A plate lives on a camera, not on a head. Two in the pack means two bodies covered, and no unscrewing between them.

Arca, named

The hub above says the profile decides what else in a bag still works, and warns that the dovetail is a shape rather than a published standard. Naming it is the minimum; two of the four pages on this shelf do not.

Forty-five grams published, and no drive named

No screw drive — coin slot, hex socket or D-ring is not stated. No anti-twist lip or pad. On a short plate held by one screw, that is what keeps a long lens from rotating.

Availability

Between 14 € and 22 € on the German, French, Italian and Spanish Amazon stores when this page was last checked.

The American and British Amazon stores carry it too, priced in local currency. Those amounts are deliberately absent from the range above, which reads euro stores only.

Everything in this section is the figure Keepa carried on the day of the last update to this page. Availability and prices shift without notice.

Prices quoted in this text were read on 13 September 2026. The live price is at the top of the page.

More quick release plates

  • SIRUI QC-55 quick release plate and its clamp base with a bubble level

    SIRUI QC-55, 55 mm Arca plate, 15 kg, with a base

    A 55 mm Arca plate sold with its own clamp base for 29 €, declaring 15 kg, with a bubble level and a rubber mat — the only kit on this shelf rather than a plate alone.

    Profile
    Arca compatible, in the title, with a 55 mm plate. It is the longest plate on this shelf — 6 mm more than the Rollei — and length is what lets a balance point travel, which the hub above says matters for a telephoto and not at all for a compact
    Length
    55 mm, in the title and the second bullet. The second also describes what the length is for in practice: the camera is pressed gently down from above rather than aligned and slid, so a longer plate gives more tolerance in where it lands
    Screw type and drive
    1/4 inch and 3/8 inch interfaces, in the first bullet — but on the BASE rather than the plate, which is what lets the clamp screw onto a tripod, a stabiliser, a gimbal or a video monitor. The drive on the plate screw itself is not named
    Anti-twist provision
    A protective rubber mat, in the third bullet, named for guarding equipment against scratches. It is the same part that resists rotation under load, and the page describes its protective role rather than its grip
    Stated clamp compatibility
    Its own, and that is the point: this is a kit. The first bullet names tripods, stabilisers, gimbals and video monitors as what the base screws onto, and the 1/4 inch interface as covering most camera models. Buying the clamp with the plate removes the question the other three pages leave open
    Material
    High-grade aluminium, in the fourth bullet, with a claimed capacity of up to 15 kg while remaining light
    Published weight
    Not published. The fourth bullet calls it featherlight and gives no figure — the one omission on an otherwise complete page
    Amazon reference
    B0DB5RWZTL (same reference on 6 Amazon marketplaces)
    EAN
    6952060074443
    • The plate and its clamp base sold together, so compatibility is settled in the box
    • Fifteen kilograms declared, and a 55 mm plate — the longest here
    • No published weight, on a page that calls the kit featherlight

    Best for: Adding an Arca clamp to a tripod, gimbal or monitor arm that does not have one, with a plate matched to it from the start.

    ≈ $29 / £25 / 29 €
    Check price on Amazon
  • VRIG AC-12 magnetic quick release plate in two parts with its sliding lock

    VRIG AC-12, magnetic claw, 40 by 24.5 mm, 50 g

    A magnetic two-part quick release at 14 €, 50 g, with a stated limit no other plate here gives: 400 g, and the page says not to exceed it.

    Profile
    The maker’s own. The first bullet calls it a claw mini quick-release design originally developed by VRIG, and it is not the Arca dovetail — so nothing else in a bag will accept it. The hub above says a proprietary profile is unambiguous within one maker and useless outside it, and that is exactly the trade here
    Length
    40 mm, with the width in the fourth bullet: 40 by 24.5 mm. It is the smallest plate on this shelf, which suits the action cameras it is made for and rules out balancing anything longer
    Screw type and drive
    Two 1/4 inch threads — one in the base, one in the plate — named in the second bullet, and the drive is not published. What the same bullet does describe is the arrangement: the screw plate stays on the action camera, so remounting is a slide rather than a rethread
    Anti-twist provision
    A rubber pad, in the third bullet, described as anti-slip. On a 24.5 mm plate under a 100 g action camera that is adequate; the hub above notes that anti-twist matters most under a long lens, which this plate explicitly refuses to carry
    Stated clamp compatibility
    Its own base, and nothing else. The second bullet describes a two-part system joined by a sliding lock; the third says the 1/4 inch connector also suits a monopod or a monitor. So it interoperates by THREAD rather than by profile — which is a different kind of compatibility, and the honest reading of a proprietary claw
    Material
    ABS and aluminium, in the fifth bullet, described as robust and durable
    Published weight
    50 g, in the fourth bullet, with the dimensions. Five grams heavier than the Rollei pair for a two-part mechanism rather than a single plate
    Amazon reference
    B0DR2NBLB6 (same reference on 6 Amazon marketplaces)
    EAN
    6975150721058
    • A stated load limit of 400 g, with an explicit warning not to exceed it
    • Two parts, so the plate stays on the camera and remounting is a slide
    • A proprietary claw profile, so nothing else in a bag will accept it

    Best for: An action camera moved between a tripod, a grip and a selfie stick several times a day, where one second beats one thread.

    ≈ 14 €
    Check price on Amazon
  • PGYTECH Snaplock square Arca-Swiss plate in black aluminium

    PGYTECH Snaplock, Arca 38 mm, square profile

    A square Arca plate at 15 € that mounts from any direction and names the 38 mm clamp it is cut for — with no dimension and no weight published anywhere.

    Profile
    Arca Swiss, named in the title and the second bullet, which goes further than any other page here: it states compatibility with 38 mm Arca-Swiss clamp bases. The hub above warns that the dovetail is a shape rather than a published standard, so naming the clamp width is the nearest a listing gets to precision
    Length
    Not published. The fourth bullet describes a square form allowing orientation adjustments in any direction, and no millimetre figure appears — which on a plate whose selling point is its shape is a real gap
    Screw type and drive
    A 1/4 inch to 3/8 inch screw, in the title and the second bullet, which claims a patented screw design that sits firmly and prevents the loosening problems common with conventional plates. The drive itself — coin slot, hex or D-ring — is not named
    Anti-twist provision
    Addressed obliquely. The patented screw design in the second bullet is aimed at loosening rather than rotation, and no lip, pad or body-specific shaping is described. The square profile itself resists rotation once clamped, which the page does not say and the geometry does
    Stated clamp compatibility
    38 mm Arca-Swiss clamp bases, named in the second bullet, with the third listing the systems: Sony, Canon and Nikon bodies, reflex and mirrorless, and phone mounts. The second adds tripods, monopods, stabilisers, sliders and handheld accessories
    Material
    High-grade aluminium alloy with a corrosion-resistant surface, in the first bullet, named for durability in demanding outdoor conditions
    Published weight
    Not published. The fifth bullet calls it small and light and easy to transport, and gives no figure — where the Rollei two places down publishes 45 g
    Amazon reference
    B0932P4KGM (same reference on 6 Amazon marketplaces)
    EAN
    0843225110303
    • The 38 mm clamp width named, which is as close to a standard as this profile gets
    • A square profile, so the plate can be clamped in any orientation without unscrewing
    • No dimensions at all, on a plate sold on its shape

    Best for: A camera that moves between a tripod head, a gimbal and a slider, where the plate has to drop into a 38 mm clamp from whichever side is convenient.

    ≈ $15 / £15 / 15 €
    Check price on Amazon

Elsewhere in the camera bag

  • Retoo five-in-one reflector disc showing its gold surface, with its zipped case

    Retoo 5-in-1, 60 cm, folds to about 20 cm

    Eight euros for a 60 cm five-in-one disc that folds to about 20 cm — and a page whose last bullet explains how to flatten the creases its own packing causes.

    Diameter
    60 cm, in the title and the second bullet, which names portraits, face lighting, smaller products and detail work as what it suits. The intro above ties diameter to softness: a larger surface close to a subject wraps, a small one at a distance behaves like another hard source. Sixty centimetres is the smallest here and is a face-sized tool
    Shape
    Round, in the second bullet. The intro above matches shape to subject — round for a face, oval or rectangular for a standing figure — and a 60 cm circle is squarely in the first case
    Surfaces supplied
    Five, each with its job named in the third bullet: white reflects softly, silver more strongly and with more contrast, gold gives a warmer cast, black reduces unwanted spill, and the translucent centre softens hard light when placed between source and subject. It is the fullest explanation of the five surfaces on this shelf
    Frame construction
    A sprung hoop, described by how it folds rather than by its material: the fourth bullet says a twisting movement collapses it to about 20 cm, and warns that the frame must be twisted fully into three small rings before it goes into the case. No steel or fibreglass is named
    Folded size
    About 20 cm, in the fourth bullet — a third of the open diameter, exactly the ratio the intro above describes. It is the smallest packed figure on this shelf
    Fabric described
    By colour and behaviour rather than by weight. No gram figure, no denier, and no reflectivity percentage — where two other discs here claim 90 per cent
    Holder or bracket compatibility
    Not published. No handle, no clamp and no bracket is named, which the intro above flags as the difference between a disc that needs an assistant and one that does not. The 29 € K&F on this shelf has two handles sewn on
    Amazon reference
    B09LD7N8R3 (same reference on 5 Amazon marketplaces)
    EAN
    5904094224609
    • Five surfaces with the purpose of each spelled out, more fully than anywhere else on this shelf
    • Folds to about 20 cm, the smallest packed size here, with a case included
    • No handle, grip or bracket, so it needs a second pair of hands outdoors

    Best for: Portraits and close product work where a face-sized disc is enough, and where 20 cm in the bag matters more than a handle.

    ≈ 8 €
    Check price on Amazon
  • Selens oval five-in-one reflector showing its three handles and gold surface

    Selens 5-in-1 oval, 80 by 120 cm, three handles, steel frame

    An oval of 80 by 120 cm on a steel frame, three handles, folding to 40 cm, for 33 € — and a durability claim of 80 per cent measured against a product it never names.

    Diameter
    Not a diameter: 80 by 120 cm, or 31.5 by 47.2 inches, in the title. The long axis is longer than the 110 cm NEEWER on this shelf and the short one is the same as the 80 cm K&F — one disc doing both jobs depending on which way it is turned
    Shape
    OVAL, and it is the only one on this shelf. The intro above matches shape to subject: round for a face, oval or rectangular for a standing figure. Turned upright an oval covers a person head to hip; turned flat it fills a table
    Surfaces supplied
    Five, with the effect of each in the first bullet: silver for contrast and raised highlights, gold for warm glowing skin tones, black to block unwanted light, white for a neutral colour temperature, translucent for a softer look without shadows
    Frame construction
    A stable STEEL frame, in the fourth bullet — the only frame material named anywhere on this shelf. Steel springs back reliably and adds weight, and no weight figure is published to say how much
    Folded size
    40 cm, in the third bullet, with a portable zipped case. From a 120 cm long axis that is a third, the ratio the intro above describes and the same one the 8 € Retoo and the 29 € K&F follow
    Fabric described
    Multiple high-quality layers with a raised-grain design, in the fifth bullet, claiming up to 90 per cent reflectivity and a life almost 80 per cent longer than a normal reflector. The second figure has no comparison product behind it: "a normal reflector" is not a measurement
    Holder or bracket compatibility
    THREE handles, in the second bullet, said to allow one-handed operation. No bracket, holder or stand fitting is mentioned — where the 32 € NEEWER on this shelf lists four supports including a sewn-in loop. This is a disc designed to be held
    Amazon reference
    B08QRLFQ1M (same reference on 5 Amazon marketplaces)
    EAN
    6923600473934
    • An oval of 80 by 120 cm, the shape the intro above recommends for a standing figure
    • Three handles and a steel frame — the only frame material named on this shelf
    • A life "almost 80 per cent longer than a normal reflector" names no product to compare with

    Best for: Standing portraits where the reflector is held by one person throughout, and where an oval covers more of the subject than a circle of the same width.

    ≈ 33 €
    Check price on Amazon
  • Pair of ATUMTEK Bluetooth camera remotes with a wrist strap attached

    ATUMTEK Two Bluetooth 5.2 remotes, 10 m, CR2032

    Eight euros for two Bluetooth 5.2 phone remotes with a published 10 m range, 20,000 shots from one CR2032 and their dimensions on the page.

    Connection type
    BLUETOOTH 5.2, in the first bullet, claimed to give lag-free operation. It is the only wireless standard on this shelf that is not a proprietary radio or infrared — and it exists because this remote talks to a phone rather than to a camera
    Sockets and bodies named
    NO CAMERA. The second bullet claims compatibility with most Android and Apple smartphones on the market, and names nothing else. It sits on this shelf as the phone answer to the same job — and the hub above compares connection, range and power, all of which this page publishes
    Half-press support
    Not applicable. A phone has no two-stage shutter button, so there is nothing to half-press: focus is set by tapping the screen before the remote is used
    Intervalometer functions
    NONE. The 39 € Rollei on this shelf is the only intervalometer here
    Stated range
    UP TO 10 METRES, in the first bullet — the shortest published range on this shelf, against 50 m for two of the camera remotes. Ten metres is a group photograph or a self-portrait, which is what a phone remote is for
    Power source
    A CR2032 button cell of 210 mAh, in the third bullet, claimed to take OVER 20,000 PHOTOGRAPHS. Publishing a shot count rather than a battery life is the right unit for this product, and 20,000 means the cell outlasts the interest
    Amazon reference
    B0CHFCFW5C (same reference on 6 Amazon marketplaces)
    EAN
    6973383077799
    • Two remotes for 8 €, with a published 10 m range
    • Over 20,000 shots from one CR2032, and the cell is included
    • Phones only — no camera, no socket, no body named

    Best for: Group photographs and self-portraits taken on a phone on a tripod, where two remotes mean one lives in a coat pocket.

    ≈ $9 / £7 / 8 €
    Check price on Amazon

All quick release plates